捕鱼大作战途游捕鱼

Add to favorites
091902
021-52668758
24H National Unified Service Hotline
logo
wKhQh1WOH96EXQZVAAAAAAgYBww528_Picture King_Picture King.jpg
  • wKhQh1WOH96EXQZVAAAAAAgYBww528_Picture King_Picture King.jpg
Modulation machine
Detailed description

Product description :

调压 Application range    上海银兮 Shanghai Yinxi       

type    TSGC2 频率特性 TSGC2 frequency characteristics        50/60HZ Low frequency 50 / 60HZ

三相 铁心形状 Power phase number Three-phase iron core shape        Ring           

Cooling form     Dry                 Iron core ring           

自藕式 防潮方式 Winding form self-propelled moisture - proof method        Open style         

cooling method     Air-cooled                external structure        Vertical           

Electricity   Press   380V/0-1000V Efficiency than 380V / 0-1000V   Rate (η)        5 % 9 5 %           

Power: 30KVA wave     shape       No additional waveform distortion   

基本原理 First, the basic principles  

The voltage regulator is an auto-transformer with continuously adjustable turns ratio. When the voltage regulator brush is moved along the polished surface of the coil by the handwheel spindle and brush holder, the turns ratio can be continuously changed So that the output voltage is smoothly adjusted from zero to the maximum value
Product performance

Working frequency 50Hz / 60Hz

0 % Efficiency 9 0 %

Waveform distortion without additional distortion

Temperature rise <60

Dielectric strength 2000V / min

三相>2MΩ Insulation resistance: three-phase> 2MΩ

Third, the main structure
单元结构:1.5KVA、10KVA调压器为调节器为调压单元结构,一个上端面具有一定宽度的磨光表面的线圈固定在工程的底座上,接触组的电刷在弹簧压力下与线圈的磨光表面紧密接触,转动手轮带动电刷在线圈磨光表面上滑动进行调压,单元调压器一般为台式,外面有防护通风罩 1. Unit structure: 1.5KVA and 10KVA regulators are regulator unit structures. A coil with a polished surface with a certain width on the upper end is fixed on the base of the project. The brushes of the contact group are under spring pressure and The polished surface of the coil is in close contact. Turning the handwheel drives the brush to slide on the polished surface of the coil to adjust the voltage. The unit voltage regulator is generally a desktop, and there is a protective ventilation cover on the outside.
单相组装结构:单相大容量调压器系由几个相同规格的单元组装而成,各单元的电刷接触组装在同一个主轴上,线圈输入端并联连接,输出端连接平衡电抗器,以平衡单元间电流分布并抑制环流。 2.Single -phase assembly structure: The single-phase large-capacity voltage regulator is assembled by several units of the same specification. The brushes of each unit are assembled on the same spindle. The input end of the coil is connected in parallel, and the balanced reactance is connected to the output end. Device to balance the current distribution between cells and suppress circulating currents.
三相组装结构:三相调压器由三相同规格的单元同轴组装而成。 3. Three-phase assembly structure: The three-phase voltage regulator is assembled coaxially from three units of the same specification.
电刷结构:3KVA及以下单元调压器,采用1~2块石墨电刷和散热良好的金属架 4KVA及以上的单元调压器,采用两块铜石墨复合电刷,电刷接触组的压板固定在线圈上端以限制其轴向位置,同时通过螺钉与主轴锁紧,当需要拆修,调换主要轴或需要从调压器底端伸出主轴时,只要松开螺钉,即可方便地进行。 4, brush structure: 3KVA and below unit voltage regulator, using 1 or 2 graphite brushes and metal frame with good heat dissipation 4KVA and above unit voltage regulator, using two copper graphite composite brushes, brush contact group The pressure plate is fixed on the upper end of the coil to limit its axial position, and is locked with the main shaft by screws. When it is necessary to dismantle, replace the main shaft or need to extend the main shaft from the bottom of the regulator, just loosen the screw. To proceed.

R TSGC2 系列调压器具有波形不失真、体积小、重量轻、效率高、使用方便、性能可靠、能长期运行等特点,达到调压、控温、调光、功率控制等目的 广泛应用于化工,冶金仪表,机电制造,轻工业,科学实验,公用设施,家用电器,控温调速,调光,及功率控制等目 ,是一种理想的交流调压电源。 Fourth, the scope of application R TSGC2 series voltage regulator has the characteristics of undistorted waveform, small size, light weight, high efficiency, easy to use, reliable performance, long-term operation, etc., to achieve the purpose of voltage regulation, temperature control, dimming, power control, etc. It is widely used in chemical, metallurgical instrumentation, electromechanical manufacturing, light industry, scientific experiments, public facilities, household appliances, temperature control, speed regulation, dimming, and power control. It is an ideal AC voltage regulator power supply.

1 Ambient temperature: ** temperature + 40 ° C, ** temperature -5

2. Altitude: The altitude where the regulator is installed does not exceed 1000 meters

3. Relative air humidity: * The monthly average relative humidity of a wet month is 90%, and the average temperature of the month is 25 ° C

4. Power supply voltage waveform: The power supply voltage waveform is a sine wave or similar to a sine wave

5. The installation site is free from gases, vapors, chemical deposits, dust, dirt and other explosive and corrosive media that seriously affect the voltage regulator insulation;
6. The installation place should be free of severe vibrations and bumps;

7, indoor use;

note! -Selection Tips This regulator product cannot be used in parallel

Five, testing and maintenance before use

新安装或长期不用的调压器,运行前必须用500伏兆欧表测量线圈对地的绝缘电阻, 其值不低于5兆欧时才可安全使用,否则应进行热烘处理。 1. For newly installed or long-term unused voltage regulators, the 500V megohmmeter must be used to measure the insulation resistance of the coil to ground before operation. The value can be used safely only when the value is not less than 5Megohms, otherwise it should be heat-treated. Hot drying treatment method can generally be charged with drying method or sent to the drying room to dry. After drying, check whether each fastener is loose, and if it is loose, it should be tightened.

电源电压应符合调压器铭牌上的输入电压。 2. The power supply voltage should match the input voltage on the regulator nameplate.

调压器必须良好接地,以保证安全 3. The voltage regulator must be well grounded to ensure safety

使用时应经常注意输出电流不超过额定值,如有短时负荷,不能超过表2的的规定,否 则易使调压器寿命降低甚至烧毁 4. When using , you should always pay attention that the output current does not exceed the rated value. If there is a short-term load, it must not exceed the requirements in Table 2. Otherwise, the life of the regulator may be reduced or even burned.

使用时应缓慢均匀地旋转手柄,以免引起电刷损坏或产生火花 5. Rotate the handle slowly and evenly during use to avoid damage to the brush or sparks.

应经常检查调压器的使用情况,如发现电刷磨损过多、缺损,应及时调换同种规格的 电刷,并用零号砂纸垫 在电刷下面转动手轮数次使电刷底面磨平,接触良好,方可使用。 6. The condition of the regulator should be checked frequently. If you find that the brushes are too worn or defective, you should replace the brushes of the same specifications in time, and turn the handwheel several times under the brushes with a sandpaper pad of zero to make the bottom surface of the brushes. Smooth and well-contacted before use. The replaced copper-graphite composite brushes must strictly meet the specifications.

线圈与电刷接受的表面,应经常保持清洁,否则易引起打火花而烧坏线圈表面。 7, the surface of the coil and brushes should be kept clean, otherwise it is easy to cause sparks and burn the surface of the coil. If black spots are found on the surface of the coil, wipe with cotton yarn and alcohol (90%) until the surface spots are removed.

从电源接到调压器,调压器到负载的导线和导线端子接头应接触很好,并能通过调压 器额定电流。 8. From the power supply to the voltage regulator, the wires from the voltage regulator to the load and the wire terminal connectors should be in good contact and be able to pass the rated current of the voltage regulator.

搬动调压器时不得用手轮,而应用提手或将整个产品提起移动 9. Do not use the handwheel when moving the pressure regulator, and use the handle or lift the entire product

调压器需要横装在面板上,(仅限于单元调压器结构)或立装在其他底座上时可利用 调压器底座的安装孔加以固定。 10, the regulator needs to be installed horizontally on the panel (only for the unit regulator structure) or when it is installed on other bases, it can be fixed by the mounting holes of the base of the regulator.

调压器应经常保持清洁不允许有水滴,油污等落入调压器内部,调压器应定时停电除 去内部积聚的尘埃。 11. The regulator should always be kept clean. No water droplets, oil, etc. should fall into the regulator. The regulator should be powered off regularly to remove the accumulated dust.           

 

公司产品服务保障: > Company product service guarantee:

Each product is strictly inspected in accordance with national standards before leaving the factory to ensure the factory pass rate

The company promises: all products are guaranteed for one year! It can be replaced free of charge if it fails within one year of normal use! (Except for special customer requirements) At present Yinxi has: AC continuity test, AC life test, reliability test, flashover breakdown test, comprehensive characteristic test, high and low temperature and resistance High temperature test, alternating and constant damp heat test, ball pressure test, leakage and aging test, drop and vibration test, ultrasonic imaging nondestructive test, plastic mechanical property test, plastic flame retardant and electrical performance test, carbon and sulfur analysis test, silicon steel sheet iron Damage test, chemical analysis test

Shanghai Yinxi Electrical Equipment Manufacturing Co., Ltd. is a comprehensive power company integrating scientific research, production, sales and product maintenance. The company has strong technical development strength and testing equipment. The company continuously strengthens the control of the quality of raw materials and processes to ensure the stability of product quality. Since its establishment, the company has been engaged in production: transformers, voltage regulators, voltage regulators, switching power supplies, and distribution boxes, etc., more than ten series, more than one hundred products, the products are exported to North America, Western Europe, the Middle East, North Africa Waiting for more than 50 countries and regions, has been well received by users.

after-sale warranty:

1. The company produces and sells various models of Yinxi transformers, Yinxi voltage regulators, and Yinxi voltage regulators, which can be customized according to customer requirements, sizes, and specifications.

2. The quality guarantee period of the dry-type transformers, voltage regulators, voltage regulators, reactors and complete grounding equipment produced by our company is one year.

3. If any product quality problem occurs during the quality guarantee period, our company is responsible for free repair or replacement.

4. The company opened a nationwide free 24-hour service hotline at 021-552668758 mobile phone 18117278398 (with the same WeChat account number) within 8 hours of receiving the complaint to reply to the processing opinions, and according to user requirements, it is divided into 24 hours, 48 hours, and Process within the same time as the user.

5 Power failure due to product accident

The role of the isolation transformer 丨 Isolation transformer principle 丨 Isolation transformer safety 丨 Isolation transformer wiring 丨 Isolation transformer grounding 丨 Isolation transformer price 丨 Isolation control transformer 丨 Isolation transformer distinction 丨 丨 Three-phase tunnel dedicated isolation transformer 丨 Cinema theater dedicated isolation transformers

隔离变压器 三相隔离变压器 单相隔离变压器 干式隔离变压器 三相干式隔离变压器 大功率变压器 10-2000KVA变压器 Specializing in the production of various types of transformers: isolation transformers , three-phase isolation transformers , single-phase isolation transformers , dry-type isolation transformers , three -phase dry- type isolation transformers , high-power transformers , 10-2000KVA transformers . 三相调压器 感应调压器 单相油浸式调压器 油浸自冷感应调压器 感应自动调压器 调压器 Oil-immersed inductive regulator , three-phase regulator , inductive regulator , single-phase oil-immersed regulator , oil-immersed self-cooling inductive regulator , inductive automatic regulator , pressure regulator . 补偿稳压器 大功率稳压器 380v大功率稳压器 自动补偿式电力稳压器 三相补偿电力稳压器 变压器 Non-contact regulator , compensation regulator , high-power regulator , 380v high-power regulator , automatic compensation power regulator , three-phase compensation power regulator , transformer .



no comment yet!
I want to comment Only users who have purchased this product can comment.
  • QQ Consulting
  • QQ QQ
  • Telephone consultation
  • 18117278398
  • 18117378728
  • 021-52668758