捕鱼大作战途游捕鱼

Add to favorites
091902
hot key words:
transformer
Product center
Sort by default
release time
个结果 18 results
  • Three-phase oil-immersed induction regulator

    TSJA Model: TSJA
    500KVA Power: 500KVA
    0-690V Voltage: 0-690V
    全铜 Material: All copper
    See more >>
  • Modulation machine

    Product description: Application range Voltage regulator brand Shanghai Yinxi Model TSGC2 Frequency characteristics Low frequency 50 / 60HZ Power phase number Three-phase iron core ring-shaped cooling type Dry core type Ring-shaped winding type Self-propelled moisture-proof method Open cooling method Air-cooled type Shape structure Vertical voltage ratio 380V / 0-1000V Efficiency (η) 95% Power: 30KVA waveform without additional waveform distortion One, the basic principle The voltage regulator is an autotransformer with continuously adjustable turns ratio. When the voltage regulator brush With the help of the main shaft of the hand wheel and the brush holder, the turns ratio can be continuously changed while sliding along the polished surface of the coil, so that the output voltage can be smoothly adjusted from zero to the maximum value of two. 60Hz efficiency 90% Waveform distortion No additional distortion Temperature rise <60 ° C Electrical resistance 2000V / min Insulation resistance: Three-phase> 2MΩ Three, main structure 1, unit Structure: 1.5KVA, 10KVA voltage regulator is a regulator unit structure. A coil with a polished surface with a certain width on the upper end is fixed on the base of the project. The light surface is in close contact. Turning the handwheel drives the brush to slide on the polished surface of the coil to adjust the voltage. The unit voltage regulator is generally a desktop, with a protective ventilation cover 2 outside. Single-phase assembly structure: single-phase large-capacity voltage regulator system Assembled by several units of the same specification, the brushes of each unit are assembled on the same main shaft, the coil input end is connected in parallel, and the output end is connected with a balance reactor to balance the current distribution between the units and suppress the circulating current. 3. Three-phase assembly structure: The three-phase voltage regulator is assembled coaxially from three units of the same specification. 4, brush structure: 3KVA and below unit voltage regulator, using 1 or 2 graphite brushes and metal frame with good heat dissipation 4KVA and above unit voltage regulator, using two copper graphite composite brushes, brush contact group The pressure plate is fixed on the upper end of the coil to limit its axial position, and is locked with the main shaft by screws. When it is necessary to dismantle, replace the main shaft or need to extend the main shaft from the bottom of the regulator, just loosen the screw. To proceed. Fourth, the scope of application RTSGC2 series voltage regulator has the characteristics of undistorted waveforms, small size, light weight, high efficiency, convenient use, reliable performance, long-term operation, etc., to achieve the purpose of voltage regulation, temperature control, dimming, power control, etc. It is widely used in chemical, metallurgical instrumentation, electromechanical manufacturing, light industry, scientific experiments, public facilities, household appliances, temperature control, speed regulation, dimming, and power control. It is an ideal AC voltage regulator power supply. 1 Ambient temperature: ** Air temperature + 40 ° C, ** Air temperature -52, Altitude: The altitude where the regulator is installed does not exceed 1000 meters 3. Relative air humidity: * The monthly average relative humidity of wet months is 90%, and at the same time The average temperature of the month is 25 ° C. 4. Power supply voltage waveform: The power supply voltage waveform is a sine wave or similar to a sine wave. 5. The installation site is free from gases, vapors, chemical deposits, dust, dirt, and others that seriously affect the voltage regulator insulation. Explosive and corrosive media; 6, the installation site should be free of severe vibration and bumps; 7, indoor use; pay attention! -Selection Tips This voltage regulator product cannot be used in parallel more than five. Inspection and maintenance before use 1. Newly installed or long-term unused voltage regulator. Before operation, you must use a 500V megohmmeter to measure the insulation resistance of the coil to ground. It can be used safely only when its value is not less than 5 Megohms, otherwise it should be heat-treated. Hot drying method can generally be charged with drying method or sent to the drying room to dry. After drying, check whether the fasteners are loose. If they are loose, tighten them. 2. The power supply voltage should conform to the input on the regulator nameplate. Voltage. 3. The voltage regulator must be well grounded to ensure safety. 4. When using, pay attention to the output current not exceeding the rated value. If there is a short-term load, do not exceed the requirements in Table 2. Otherwise, the life of the voltage regulator may be reduced or even burned. 5. Rotate the handle slowly and evenly during use, so as not to cause damage to the brushes or sparks. 6. The use of the regulator should be checked frequently. If you find that the brushes are too worn or defective, you should replace the brushes of the same specifications in time. , And use the No. 0 sandpaper pad under the brush to turn the hand wheel several times to make the bottom surface of the brush smooth, good contact before use. The replaced copper-graphite composite brushes must strictly meet the specifications. 7, the surface of the coil and brushes should be kept clean, otherwise it is easy to cause sparks and burn the surface of the coil. If black spots are found on the surface of the coil, wipe them with cotton yarn and alcohol (90%) until the surface spots are removed. 8. Connect the power supply from the power supply to the voltage regulator. The wires from the voltage regulator to the load and the wire terminal connectors should be in good contact. Can pass the rated current of the regulator. 9. Do not use the handwheel when moving the pressure regulator, and use the handle or lift the entire product. 10, the pressure regulator needs to be installed on the panel horizontally (only for unit pressure regulator structure) or installed on other bases. It can be fixed by using the mounting holes of the regulator base. 11. The regulator should always be kept clean. No water droplets, oil, etc. should fall into the regulator. The regulator should be powered off regularly to remove the accumulated dust. > Company product service guarantee: Each product is strictly inspected in accordance with national standards before leaving the factory to ensure the factory pass rate. The company promises: all products are guaranteed for one year! It can be replaced free of charge if it fails within one year of normal use! (Except for special customer requirements) At present Yinxi has: AC continuity test, AC life test, reliability test, flashover breakdown test, comprehensive characteristic test, high and low temperature and resistance High temperature test, alternating and constant damp heat test, ball pressure test, leakage and aging test, drop and vibration test, ultrasonic imaging nondestructive test, plastic mechanical property test, plastic flame retardant and electrical performance test, carbon and sulfur analysis test, silicon steel sheet iron Damage testing, chemical analysis test Shanghai Yinxi Electrical Equipment Manufacturing Co., Ltd. is a comprehensive power company integrating scientific research, production, sales and product maintenance. The company has a strong technical development force and the best testing and testing equipment. The company continuously strengthens the control of the quality of raw materials and processes to ensure the stability of product quality. Since its establishment, the company has been engaged in production: transformers, voltage regulators, voltage regulators, switching power supplies, and distribution boxes, etc., more than ten series, more than one hundred products, the products are exported to North America, Western Europe, the Middle East, North Africa Waiting for more than 50 countries and regions, has been well received by users. After-sale guarantee: 1. The company produces and sells various models of Yinxi transformers, Yinxi voltage regulators, and Yinxi voltage regulators, which can be customized according to customer requirements, sizes, and specifications. 2. Our company The quality guarantee period of the dry-type transformers, voltage regulators, voltage regulators, reactors, and complete grounding equipment is one year. 3. If any product quality problem occurs during the quality guarantee period, our company is responsible for free repair or replacement. 4. The company opened a nationwide free 24-hour service hotline at 021-552668758 mobile phone 18117278398 (with the same WeChat account number) within 8 hours of receiving the complaint to reply to the processing opinions, and according to user requirements, it is divided into 24 hours, 48 hours, and Process within the same time as the user. 5 The power outage caused by product accidents, our company promises the role of the isolation transformer within 24 hours in developed areas 丨 Isolation transformer principle 丨 Isolation transformer safety 丨 Isolation transformer wiring 丨 Isolation transformer grounding 丨 Isolation transformer price 丨 Isolation control transformer 丨 Isolation transformer difference 丨丨 Isolation transformer for three-phase tunnels 丨 Isolation transformer for cinemas 丨 Isolation transformer for projectorsProfessional production of various types of transformers: isolation transformer, three-phase isolation transformer, single-phase isolation transformer, dry-type isolation transformer, three-phase dry-type isolation transformer, high power Transformer, 10-2000KVA transformer. Oil-immersed inductive regulator, three-phase regulator, inductive regulator, single-phase oil-immersed regulator, oil-immersed self-cooled inductive regulator, inductive automatic regulator, pressure regulator. Non-contact regulator, compensation regulator, high-power regulator, 380v high-power regulator, automatic compensation power regulator, three-phase compensation power regulator, transformer.

    TSGC2 Model: TSGC2
    380/0-1000V可调 Power: 380 / 0-1000V adjustable
    30KVA(可定制) Voltage: 30KVA (can be customized)
    铜线(质保五年) Material: copper wire (five-year warranty)
    See more >>
  • Three-phase contact voltage regulator

    Product description: Application range Voltage regulator brand Shanghai Yinxi Model TSGC2 Frequency characteristics Low frequency 50 / 60HZ Power phase number Three-phase iron core ring-shaped cooling type Dry core type Ring-shaped winding type Self-propelled moisture-proof method Open cooling method Air-cooled type Shape structure Vertical voltage ratio 380V / 0-430V Efficiency (η) 95% Power: 60KVA waveform without additional waveform distortion One, the basic principle The voltage regulator is an autotransformer with continuously adjustable turns ratio. When the voltage regulator brush With the help of the main shaft of the hand wheel and the brush holder, the turns ratio can be continuously changed while sliding along the polished surface of the coil, so that the output voltage can be smoothly adjusted from zero to the maximum value of two, and the product's working frequency is 50Hz / 60Hz efficiency 90% Waveform distortion No additional distortion Temperature rise <60 ° C Electrical resistance 2000V / min Insulation resistance: Three-phase> 2MΩ Three, main structure 1, unit structure: 1.5KVA The 10KVA voltage regulator is a regulator with a pressure regulating unit structure. A coil with a polished surface with a certain width on the upper end is fixed on the base of the project. The brushes of the contact group are in close contact with the polished surface of the coil under the pressure of the spring. Turn the handwheel to drive the brush to slide on the polished surface of the coil to adjust the voltage. The unit voltage regulator is generally a desktop with a protective hood 2 outside. Single-phase assembly structure: The single-phase large-capacity voltage regulator consists of several same specifications. The brushes of each unit are assembled on the same spindle. The coil input end is connected in parallel and the output end is connected to a balance reactor to balance the current distribution between the units and suppress the circulating current. 3. Three-phase assembly structure: The three-phase voltage regulator is assembled coaxially from three units of the same specification. 4, brush structure: 3KVA and below unit voltage regulator, using 1 or 2 graphite brushes and metal frame with good heat dissipation 4KVA and above unit voltage regulator, using two copper graphite composite brushes, brush contact group The pressure plate is fixed on the upper end of the coil to limit its axial position, and is locked with the main shaft by screws. When it is necessary to dismantle, replace the main shaft or need to extend the main shaft from the bottom of the regulator, just loosen the screw. To proceed. Fourth, the scope of application RTSGC2 series voltage regulator has the characteristics of undistorted waveforms, small size, light weight, high efficiency, convenient use, reliable performance, long-term operation, etc., to achieve the purpose of voltage regulation, temperature control, dimming, power control, etc. It is widely used in chemical, metallurgical instrumentation, electromechanical manufacturing, light industry, scientific experiments, public facilities, household appliances, temperature control, speed regulation, dimming, and power control. It is an ideal AC voltage regulator power supply. 1 Ambient temperature: ** Air temperature + 40 ° C, ** Air temperature -52, Altitude: The altitude where the regulator is installed does not exceed 1000 meters 3. Relative air humidity: * The monthly average relative humidity of wet months is 90%, and at the same time The average temperature of the month is 25 ° C. 4. Power supply voltage waveform: The power supply voltage waveform is a sine wave or similar to a sine wave. 5. The installation site is free from gases, vapors, chemical deposits, dust, dirt, and others that seriously affect the voltage regulator insulation. Explosive and corrosive media; 6, the installation site should be free of severe vibration and bumps; 7, indoor use; pay attention! -Selection Tips This voltage regulator product cannot be used in parallel more than five. Inspection and maintenance before use 1. Newly installed or long-term unused voltage regulator. Before operation, you must use a 500V megohmmeter to measure the insulation resistance of the coil to ground. It can be used safely only when its value is not less than 5 Megohms, otherwise it should be heat-treated. Hot drying method can generally be charged with drying method or sent to the drying room to dry. After drying, check whether the fasteners are loose. If they are loose, tighten them. 2. The power supply voltage should conform to the input on the regulator nameplate. Voltage. 3. The voltage regulator must be well grounded to ensure safety. 4. When using, pay attention to the output current not exceeding the rated value. If there is a short-term load, do not exceed the requirements in Table 2. Otherwise, the life of the voltage regulator may be reduced or even burned. 5. Rotate the handle slowly and evenly during use, so as not to cause damage to the brushes or sparks. 6. The use of the regulator should be checked frequently. If you find that the brushes are too worn or defective, you should replace the brushes of the same specifications in time. , And use the No. 0 sandpaper pad under the brush to turn the hand wheel several times to make the bottom surface of the brush smooth, good contact before use. The replaced copper-graphite composite brushes must strictly meet the specifications. 7, the surface of the coil and brushes should be kept clean, otherwise it is easy to cause sparks and burn the surface of the coil. If black spots are found on the surface of the coil, wipe them with cotton yarn and alcohol (90%) until the surface spots are removed. 8. Connect the power supply from the power supply to the voltage regulator. The wires from the voltage regulator to the load and the wire terminal connectors should be in good contact. Can pass the rated current of the regulator. 9. Do not use the handwheel when moving the pressure regulator, and use the handle or lift the entire product. 10, the pressure regulator needs to be installed on the panel horizontally (only for unit pressure regulator structure) or installed on other bases. It can be fixed by using the mounting holes of the regulator base. 11. The regulator should always be kept clean. No water droplets, oil, etc. should fall into the regulator. The regulator should be powered off regularly to remove the accumulated dust. > Company product service guarantee: Each product is strictly inspected in accordance with national standards before leaving the factory to ensure the factory pass rate. The company promises: all products are guaranteed for one year! It can be replaced free of charge if it fails within one year of normal use! (Except for special customer requirements) At present Yinxi has: AC continuity test, AC life test, reliability test, flashover breakdown test, comprehensive characteristic test, high and low temperature and resistance High temperature test, alternating and constant damp heat test, ball pressure test, leakage and aging test, drop and vibration test, ultrasonic imaging nondestructive test, plastic mechanical property test, plastic flame retardant and electrical performance test, carbon and sulfur analysis test, silicon steel sheet iron Damage testing, chemical analysis test Shanghai Yinxi Electrical Equipment Manufacturing Co., Ltd. is a comprehensive power company integrating scientific research, production, sales and product maintenance. The company has a strong technical development force and the best testing and testing equipment. The company continuously strengthens the control of the quality of raw materials and processes to ensure the stability of product quality. Since its establishment, the company has been engaged in production: transformers, voltage regulators, voltage regulators, switching power supplies, and distribution boxes, etc., more than ten series, more than one hundred products, the products are exported to North America, Western Europe, the Middle East, North Africa Waiting for more than 50 countries and regions, has been well received by users. After-sale guarantee: 1. The company produces and sells various models of Yinxi transformers, Yinxi voltage regulators, and Yinxi voltage regulators, which can be customized according to customer requirements, sizes, and specifications. 2. Our company The quality guarantee period of the dry-type transformers, voltage regulators, voltage regulators, reactors, and complete grounding equipment is one year. 3. If any product quality problem occurs during the quality guarantee period, our company is responsible for free repair or replacement. 4. The company opened a nationwide free 24-hour service hotline at 021-552668758 mobile phone 18117278398 (with the same WeChat account number) within 8 hours of receiving the complaint to reply to the processing opinions, and according to user requirements, it is divided into 24 hours, 48 hours, and Process within the same time as the user. 5 The power outage caused by product accidents, our company promises the role of the isolation transformer within 24 hours in developed areas 丨 Isolation transformer principle 丨 Isolation transformer safety 丨 Isolation transformer wiring 丨 Isolation transformer grounding 丨 Isolation transformer price 丨 Isolation control transformer 丨 Isolation transformer difference 丨丨 Isolation transformers for three-phase tunnels 丨 Isolation transformers for cinemas 丨 Isolation transformers for projectors Transformer, 10-2000KVA transformer. Oil-immersed inductive regulator, three-phase regulator, inductive regulator, single-phase oil-immersed regulator, oil-immersed self-cooled inductive regulator, inductive automatic regulator, pressure regulator. Non-contact regulator, compensation regulator, high-power regulator, 380v high-power regulator, automatic compensation power regulator, three-phase compensation power regulator, transformer.

    TSGC2J Model: TSGC2J
    80KVA Power: 80KVA
    380/0-430V可定做 Voltage: 380 / 0-430V can be customized
    铜线(质保五年) Material: copper wire (five-year warranty)
    See more >>
  • Three-phase electric voltage regulator

    Product Introduction Voltage regulator can be widely used in industry (such as chemical industry, metallurgy, instrumentation, electromechanical manufacturing, light industry, etc.), scientific experiments, public equipment, household appliances to achieve voltage regulation, temperature control, speed regulation, dimming And power control, it is an ideal AC voltage regulator. The column electric voltage regulator has no distortion of the output voltage waveform (the distortion rate of the output voltage waveform is <1%). The column electric voltage regulator adopts an electric operating mechanism, which can operate in a closed loop for a long distance, reducing the labor intensity of operation. The output voltage can be adjusted from zero voltage, strong instantaneous overload capacity, no-load current, small no-load loss, high efficiency, low noise, and long life. Suitable for various inductive and capacitive loads! How to use: 1. Before use, it must be confirmed that the grid voltage and the input voltage should be the same. Do not connect the input and output ends in reverse. 2. The voltage regulator should be connected to a protective ground wire and grounded reliably. 3. The pointer should be at the zero position before power on, and adjusted to the required voltage according to the voltage requirements. 4. The regulator is kept clean and protected from moisture. Ventilate during use. 5. In order to ensure the normal use of the regulator, the rotating part and the contact surface are regularly inspected and maintained. This work should generally be performed when electricity is not available. 6. After using the voltage regulator, the voltage should be turned to zero. Technical index capacity: 30KVA-2000KVA Input voltage: single-phase 220V three-phase 380V output voltage: single-phase 0-250V three-phase 0-500V voltage change rate: ± 1% Distortion of output waveform: no distortion (compared with input waveform) Insulation class: Class F, Working efficiency: ≥96% Applicable frequency: 50 / 60Hz Connection method: Auto-coupling overload capacity: Allow more than 1.5 times rated load to work for 1 hour Full load) Noise: ≤35dB (within one meter) Temperature rise: ≤60 ℃ Insulation resistance: ≥150MΩ Electrical resistance: 2000VAC / 1min Design life: 20 years Working environment: Temperature: -20 ~ + 50 ℃ Humidity: ≤95 % RH non-condensing Workplace: non-corrosive gas and conductive dust Cooling method: dry air cooling Stocking situation: 10-15 working days Model specifications Product structure chart

    TEDGZ/TESGZ Model: TEDGZ / TESGZ
    30KVA Power: 30KVA
    220V/380v Voltage: 220V / 380v
    铜线 Material: copper wire
    See more >>
  • TESGZ column electric voltage regulator

    It is widely used in chemical, metallurgy, instrumentation, electromechanical manufacturing, light industry, scientific experiments, public facilities, household appliances, temperature control and speed regulation, dimming, and power control. It is an ideal AC voltage regulator power supply. Product parameters Applicable venue: input voltage: single-phase 220V three-phase 380V (three-phase four-wire) output voltage: single-phase 0-250V three-phase 0-430V or 0-630V frequency: 50HZ efficiency> 95% strain time: 0.2-05S Waveform distortion: No additional distortion Electric strength: Power frequency sine wave voltage 2000V without breakdown and flashover phenomenon for 1 minute Insulation resistance> 5 Working principle TEDGZ, TESGZ series single-phase, three-phase high-power electric column voltage regulator, I am The company develops, designs and produces new high-power column regulators based on market demands to meet the needs of customers. The column electric voltage regulator has no distortion of the output voltage waveform (the increase rate of the distortion rate of the output voltage waveform is less than 1%). The column electric voltage regulator adopts an electric operating mechanism, which can operate in a closed loop for a long distance, reducing the labor intensity of operation. The output voltage can be adjusted from zero voltage, strong instantaneous overload capacity, no-load current, low no-load loss, high efficiency, low voice and long life. Suitable for various inductive, capacitive, resistive load and other characteristics. The voltage regulator can steplessly, smoothly and continuously regulate the output voltage under load. Because of its low impedance and low voltage waveform distortion rate, it is especially suitable for testing power sources for motors and electrical appliances. It can also be used for supporting rectifiers, DC speed regulation, communication equipment, and medical instruments. Features: 1 Low no-load current and total loss 2 Low distortion rate of output voltage waveform; 3 Low impedance voltage 4 Low lower limit value of output voltage 5 Good linearity of output voltage adjustment 6 Can withstand sudden sudden load. Rated capacity kVA Phase frequency Frequency Rated input voltage V Output voltage range V Rated output current A Loss W No-load current A No-load load (75 ° C) 161502200-25064110 2002.520801202502.8251001303203.231.51261404203.540160150530450 2002807006.363252300900780320330118081004004001500150011.8125500560200013.225350380 0-43033.6300 .72005001.65067.12206501.76384.62508501.98010742011203.61001344501400412516850018004.51602158002500520026985031507

    TESGZ Model: TESGZ
    60KVA Power: 60KVA
    380V/0-450V(可定做) Voltage: 380V / 0-450V (can be customized)
    铜线 Material: copper wire
    See more >>
  • Column Electric Voltage Regulator

    Voltage regulators can be widely used in industry (such as chemical industry, metallurgy, instrumentation, electromechanical manufacturing, light industry, etc.), scientific experiments, public equipment, household appliances to achieve voltage regulation, temperature control, speed regulation, dimming and power For control and other purposes, it is an ideal AC voltage regulator. The column electric voltage regulator has no distortion of the output voltage waveform (the distortion rate of the output voltage waveform is <1%). The column electric voltage regulator adopts an electric operating mechanism, which can operate in a closed loop for a long distance, reducing the labor intensity of operation. The output voltage can be adjusted from zero voltage, strong instantaneous overload capacity, no-load current, small no-load loss, high efficiency, low noise, and long life. Suitable for various inductive and capacitive loads! How to use: 1. Before use, it must be confirmed that the grid voltage and the input voltage should be the same. Do not connect the input and output ends in reverse. 2. The voltage regulator should be connected to a protective ground wire and grounded reliably. 3. The pointer should be at the zero position before power on, and adjusted to the required voltage according to the voltage requirements. 4. The regulator is kept clean and protected from moisture. Ventilate during use. 5. In order to ensure the normal use of the regulator, the rotating part and the contact surface are regularly inspected and maintained. This work should generally be performed when electricity is not available. 6. After using the voltage regulator, the voltage should be turned to zero. Capacity: 30KVA-2000KVA Input voltage: single-phase 220V three-phase 380V output voltage: single-phase 0-250V three-phase 0-500V voltage change rate: ± 1% output waveform Distortion: No distortion (compared with the input waveform) Insulation level: Class F, Working efficiency: ≥96% Applicable frequency: 50 / 60Hz Connection method: Auto-coupling overload capacity: Allows more than 1.5 times the rated load to work for 1 hour (long-term full load) Noise: ≤35dB (within one meter) Temperature rise: ≤60 ℃ Insulation resistance: ≥150MΩ Anti-electric strength: 2000VAC / 1min Design life: 20 years Working environment: Temperature: -20 ~ + 50 ℃ Humidity: ≤95% RH Non-condensing Workplace: Non-corrosive gas and conductive dust Cooling method: Dry air-cooled Stocking situation: 10-15 working days

    TESGZ Model: TESGZ
    150KVA Power: 150KVA
    380V/0-450V Voltage: 380V / 0-450V
    铜线(质保三年) Material: Copper wire (three-year warranty)
    See more >>
  • Three-phase column voltage regulator

    Product Introduction Voltage regulator can be widely used in industry (such as chemical industry, metallurgy, instrumentation, electromechanical manufacturing, light industry, etc.), scientific experiments, public equipment, household appliances to achieve voltage regulation, temperature control, speed regulation, dimming And power control, it is an ideal AC voltage regulator. The column electric voltage regulator has no distortion of the output voltage waveform (the distortion rate of the output voltage waveform is <1%). The column electric voltage regulator adopts an electric operating mechanism, which can operate in a closed loop for a long distance, reducing the labor intensity of operation. The output voltage can be adjusted from zero voltage, strong instantaneous overload capacity, no-load current, small no-load loss, high efficiency, low noise, and long life. Suitable for various inductive and capacitive loads! How to use: 1. Before use, it must be confirmed that the grid voltage and the input voltage should be the same. Do not connect the input and output ends in reverse. 2. The voltage regulator should be connected to a protective ground wire and grounded reliably. 3. The pointer should be at the zero position before power on, and adjusted to the required voltage according to the voltage requirements. 4. The regulator is kept clean and protected from moisture. Ventilate during use. 5. In order to ensure the normal use of the regulator, the rotating part and the contact surface are regularly inspected and maintained. This work should generally be performed when electricity is not available. 6. After using the voltage regulator, the voltage should be turned to zero. Technical index capacity: 30KVA-2000KVA Input voltage: single-phase 220V three-phase 380V output voltage: single-phase 0-250V three-phase 0-500V voltage change rate: ± 1% Distortion of output waveform: no distortion (compared with input waveform) Insulation class: Class F, Working efficiency: ≥96% Applicable frequency: 50 / 60Hz Connection method: Auto-coupling overload capacity: Allow more than 1.5 times rated load to work for 1 hour (can be used for a long time Full load) Noise: ≤35dB (within one meter) Temperature rise: ≤60 ℃ Insulation resistance: ≥150MΩ Electrical resistance: 2000VAC / 1min Design life: 20 years Working environment: Temperature: -20 ~ + 50 ℃ Humidity: ≤95 % RH non-condensing Workplace: non-corrosive gas and conductive dust Cooling method: dry air cooling Stocking situation: 10-15 working days Model specifications Product structure chart

    TESGZ Model: TESGZ
    60KVA Power: 60KVA
    380V/0-450V Voltage: 380V / 0-450V
    铜线 Material: copper wire
    See more >>
  • Three-phase voltage regulator

    TSGC2 Model: TSGC2
    10KVA Power: 10KVA
    380、0-500v(可定做) Voltage: 380, 0-500v (can be customized)
    铜线(质保三年) Material: Copper wire (three-year warranty)
    See more >>
  • Electric voltage regulator

    TDGC2-D Model: TDGC2-D
    (可选) Power: (optional)
    220V/0-300V Voltage: 220V / 0-300V
    铜线 Material: copper wire
    See more >>
  • Single-phase contact regulator

    TSGC2-3KVA Model: TSGC2-3KVA
    3KVA Power: 3KVA
    0-250V 可调 Voltage: 0-250V adjustable
    Material: Copper
    See more >>
  • Single-phase AC contact voltage regulator

    TDGC2 Model: TDGC2
    20KVA Power: 20KVA
    220V/0-250V Voltage: 220V / 0-250V
    铜线 Material: copper wire
    See more >>
  • TDGC2J, TSGC2J contact voltage regulator

    TDGC2J ,TSGC2J Model: TDGC2J, TSGC2J
    30KVA Power: 30KVA
    220V/0-250V(可定做) Voltage: 220V / 0-250V (can be customized)
    铜线 Material: copper wire
    See more >>
  • QQ Consulting
  • QQ QQ
  • Telephone consultation
  • 18117278398
  • 18117378728
  • 021-52668758